With the Zodiac MX6, you’re getting a powerful, efficient, and compact suction side pool cleaner. This cleaner offers the best vacuum power in its class and uses programmed navigation to get your pool looking better than ever. Its low-flow design means it consumes less energy and makes it ideal for pools with a variable speed pump.
The MX6 includes powerful vacuuming with its cyclonic suction and has an articulating turbine blade which allows it to climb your pool walls with ease. Its swivel hose is easy to connect, and a flow regulator helps to control water flow, so you don’t have to worry about adjusting the skimmer.
Zodiac MX6 Features
- Powerful cyclonic suction
- Quick connect swivel hose
- Flow regulator
- Flex power turbine
- 28’ hose
- 17.5 pounds
- Easy-grip handle
- 1-year warranty
Climbs pool walls with ease
With its articulated turbine blades, the Zodiac MX6 shows off its impressive wall climbing ability. That means every nook, corner, cranny, and side is well within the reach of this pool cleaner. Since it has the ability to reverse as needed, the MX6 never wanders outside your pool.
Powerful, smooth clean
The Zodiac MX6 may be small, but it is equipped with powerful suction capabilities. Dirt and debris are no match for this pool cleaner, and it’ll even clean up leaves, rocks, and acorns. The MX6 will continue to clean your entire pool with its cyclonic suction technology which is where it gets it powerful vacuuming ability. This vacuum can reverse when needed, which makes corners less difficult to navigate, leaving you with a nice, clean pool.
Sleek and compact
With its sleek and compact design, the Zodiac MX6 pool cleaner doesn’t take up a lot of room and is easily portable. At 17.5 pounds it’s not so heavy that you can’t move it around where you need it to go. Its body consists of durable plastic, so you don’t have to worry much about rust. The tracks and gears on the MX6 are high-quality and offer great performance.
Perfect for medium and small pools
The Zodiac MX6 pool cleaner was not designed for bigger pools. It is perfect for smaller and medium-sized pools since the hose length isn’t long enough for larger ones. Be sure you’re only using hoses meant for the MX6 because some users have tried to extend the range of the cleaner only to discover that there are problems with the connector since it’s not made by Zodiac.
Easy to clean
Every pool cleaner needs to be taken care of every once in a while, and the Zodiac MX6 is no exception. However, this cleaner offers a quick lock that makes opening and cleaning out debris nice and easy. You don’t need any fancy tools or cloths to clean it, which means it takes just a few minutes to clean it. Then you can drop it back into your pool and have it ready to go another round.
Quick and simple assembly
The Zodiac MX6 is so simple and easy to assemble that you might be tempted to let your kid take care of it. Setting up this cleaner takes little time and effort and ships with all the accessories needed to get it done. It comes with the required hoses, valves, and other parts necessary to get your pool cleaner up and running in no time.
Little effort and maintenance required
At just under 20 pounds, the Zodiac MX6 doesn’t require too much effort to move, and its nifty handle makes it easy to lift out of the pool. Additionally, the MX6 only has one gearbox, which means it has less moving parts which makes it easier to maintain. It also integrates easily with variable and two-speed pumps if needed.
Pros of the Zodiac MX6
- Easy to assemble
- Comes with all needed parts
- Works with variable and two-speed pumps
- Compact, yet powerful
- Cleans side walls
- Pain-free maintenance
- Nifty handle to lift out of the pool
- 1-year warranty
Cons of the Zodiac MX6
- Only for smaller and medium-sized pools
- Has been known to clog when vacuuming large piles
- Does not include a caddy
What Others Are Saying
The Zodiac MX6 has so many qualities that appeal to its users, that it has won over the majority of them. It is easily assembled, which some users alluded to, however most liked how well the cleaner operated throughout its cleaning. For the most part the MX6 does a great job of picking up dirt and debris scattered throughout your pool, and several users pointed to the fact that little assistance was required on their part when running their pool cleaner.
You won’t have to change the parts very often on the Zodiac MX6, and the ones that do need changing are easy to address and inexpensive. Those with poor user experiences pointed out the need to swap out the treads on a regular basis or ran into problems with the hoses. Some complained that the cleaner clogged up when attempting to vacuum large piles of debris, while a few others mentioned that after a few months of usage, their MX6 stopped working completely.
Final Thoughts on the Zodiac MX6
The Zodiac MX6 in-ground pool cleaner has plenty of features and benefits that any pool owner would enjoy. While it is designed for smaller and medium-sized pools, it provides a great enough experience that you’ll soon forget that it has these limitations. It offers a great cleaning experience and will leave your pool sparkling clean in no time.
That’s not to suggest that this is the perfect pool cleaner. It has its flaws, one of which includes clogging when vacuuming large piles of leaves or debris. So if your pool is surrounded by a lot of trees and plants that shed their leaves, the MX6 may not be the right pool cleaner for you. Otherwise, if you’re looking for a good pool cleaner that doesn’t require a lot of energy or maintenance, the Zodiac MX6 might be the one for you.
Zodiac Pool Systems unveiled the Zodiac MX6 in 2014. Five years later, with all the new technology and robotic pool cleaners, is this compact advanced suction pool cleaner still relevant? Don’t be surprised because it still is!
This pool cleaner is still among the consumer favorites in its league. There is no denying that suction pool cleaners are still the most powerful type of pool cleaners. Because it is not limited to its built-in suction capacity, but is powered by the pool’s pump. Its staying power in the market is a testimony that the Zodiac MX6 is an efficient, easy-to-use and durable pool cleaner. It’s about time you get to know more about the best and unique features of the Zodiac MX6.
In-Depth Review Of Zodiac MX6 In-Ground and Aboveground Pool Cleaner
The Zodiac MX6 is a portable and lightweight suction side pool cleaner. It has an easy-grip handle on the top left that allows easy lifting of the equipment from the pool. This pool cleaner features a cyclonic suction that makes it easy for it to climb walls and suck large amounts of medium to large size debris. It also has a large debris opening that can take it pebbles, rocks, acorns and piles or leaves effortlessly.
This pool cleaner is designed to clean both in-ground and above ground pools. It sucks debris as it cleans pool surfaces like concrete, tile, vinyl and fiberglass. The wheels are equipped with X-Drive Technology with X-Trax that scrubs out dirt build-up in areas that it will pass. With the right flow rate, the Zodiac MX6 can clean your pool’s walls and waterline too.
The MX6 can navigate around your pool and get past slopes easily. Turning around will stop the wheels on the other side and lets the other side to maneuver and make turns. It is energy efficient and is designed to work on variable-speed, two-speed and solar-powered pumps. The later models also come with an MX flow regulator that controls excess flow on your cleaner.
Steps to Properly Install and Use the Zodiac MX6 Pool Cleaner
The most crucial part in ensuring that you can get the best out of your Zodiac MX6 Pool Cleaner relies on the proper setup and the right amount of flow. Here is a quick guide for an efficient installation :
1. Check if all of the accessories included in the package list are complete.
2. Start filtration. Make sure that your pumps are running well.
3. Check the return jet of your pool. It should be pointing downwards, towards the center of the pool.
4. Measure the hose length that you need. Both ends of the hose should be touching the farthest side of the pool and the connection.
5. For side-port installation: Install the in-ground valve cuff and connect the other end of the hose with a 45-degree elbow.
6. For skimmer installation: Choose the skimmer that is closest to the pump. Remove the skimmer basket. Insert the valve cuff and secure the flow keeper control valve with a 45-degree elbow on top.
7. Ensure that the hose has no air inside and is completely filled with water.
8. Submerge the cleaner and connect it to the hose once it’s filled with water.
9. Observe and time the wheel rotation using the yellow indicator on the wheel. It should rotate at least 10 times between 20-25 seconds.
10. Adjust the flow rate in the flow keeper valve as necessary. Later models already come with an MX flow regulator.
Specifications and Features of the Zodiac MX6:
What’s in the box?
FAQS about the Zodiac MX6 Suction Pool Cleaner
What’s the difference between the Zodiac MX6 and MX8?
Zodiac MX6 and MX8 have the same propulsion system that runs them. One noticeable difference is the ability of the MX8 to reverse, although it is not a vital feature since the MX8 can swiftly navigate and make turns. The MX6 is also more compact than the MX8. The MX6 has one turbine at the bottom while MX8 has two. The MX6 also has an easy-grip handle that the MX8 doesn’t have.
What kind of debris can the Zodiac MX6 pick-up?
Medium to large size debris can be taken in effortlessly with the powerful suction and large debris opening of the Zodiac MX6. Demo videos show that the cleaner can efficiently pick up piles of leaves and debris like pebbles and acorns.
The Zodiac MX6 Pool Cleaner is a 5-year old technology with unwavering popularity. With the dawn of robotic pool cleaners, some consumers still prefer the optimal cleaning that suction type pool cleaners can offer. Despite being launched some years ago, Zodiac came up with accessories like the MX flow regulator to eliminate guesswork if your cleaner has the right flow rate. This also boosts the efficiency of the pool cleaner to work on low-flow pumps. If you are looking for a suction pool cleaner that can climb the walls, clean the waterline, take care of large debris with unmatched portability and durability – that must be the Zodiac MX6.