You are here because you are probably wondering why your pool liner has been lining up away from the wall. Well, worry no more because it’s an issue that affects countless swimming pool owners all across the world today. While pool liner problems are not easy to diagnose, you will find it easy to do so when you have the right information.
Fortunately, this guide takes a look at all the common pool liner lining up away from wall aspects that you have to consider.
Causes of Pool Lining Up Away from Wall
Usually, the most common cause of your pool lining up away from the wall would be due to issues such as heavy rainfall. When the water seeps through and gets behind the wall, it may cause it to start pulling away.
In some cases, the issue occurs if your area is prone to heavy rainfall, and water regularly gets through to the wall behind. Even if water getting behind the wall is a rare occurrence, its an excellent example of what to expect.
The vinyl liners can float, and the fibreglass pools can come right out of the ground. If the water gets through the pool liner, the seal will become compromised and lead to the development of wrinkles. Plus, it may also cause the liner to develop soft spots.
If this is the issue, then the liner might lift up, and float through the water. If such an issue occurs, don’t panic, stay calm because finding a suitable solution is easy. Mother nature might be the issue, and the good thing is that you can still place it back if the liner is in good condition.
Things You Can Do Stop Such Issues
The first thing you should do is to determine the presence of the issue, and find ways to address it right. These steps involved in the process include:
Understanding How Pool Liners Work?
You can install pool liners by fastening them to the top section of the pool. Then you can hold them tightly in position by using the weight of the water. When you first install the pool liner, certain air pockets of air often remain in the pool liner. However, you have to remove the pockets of air by using a vacuum.
Then, add water to the pool, and the weight of the water will help hold the liner in the right position. Whether water seeps behind the liner due to flood or overfilling, the water pressure will equalize on either side of the line. And, this can cause the liner to move.
It’s a complication people commonly refer to as a “floating” liner. Issues relating to groundwater are not unique to these types of liners. That said, ground water will also lift entire pools out the ground, if the surrounding drainage is not of suitable quality.
More so, the fibreglass style pools also feature concrete shells that might “pop up” or move when you experience severe water exposure issues. A floating liner features fastening on the top section. However, some water underneath the wrinkles might start to come up.
However, you have to ensure that you set up the liner correctly during this time. You can do this by using a pool broom, which you can use to move the liner outward to the wall. Its unique because the water drains away from the rear section of the liner.
The only challenge is that this process might require a few weeks for you to achieve the best results. Plus, it also depends on the amount of groundwater present below the pool liner. Furthermore, you can also consider removing the water by using a “vacuum pipe.” That said, some pools don’t come with vacuum pipes, and you may have to adjust to the same accordingly.
You may also have to get in touch with a local professional pool service to help drain and refit the pool liner as required. They might also provide useful advice you can use as a preventative measure for such issues in the future.
My Liner Has Several Wrinkles, What Could This Do?
It shows that water has seeped through under the liner, and this often causes damage to the structure. The wrinkles are not good, especially on vinyl liners. So, take care and ensure the items don’t get exposed to the pressure.
My Liner is Spongy and Soft in the Corners. What Could Be The Issue?
It could be due to the fact that water has seeped through, and this is often damage that occurs due to ground water exposure. The issue could be due to water seepage that occurs due to flood or the overfilling of pools.
How Do I Remove Water from Behind my Pool Liner?
The best way to remove this type of water would be to use a vacuum pipe. The pipe lets you suck out the water from the pool, and without causing any damage to the structure itself.
The Water Has Drained from Behind the Liner, But it Has Wrinkles Which are Not Easy to Remove? What Should I Do?
The best solution for you would be to partially drain and re-position the liner. Doing this accurately should help remove the wrinkles and make the pool usable again.
Overall, there are a few factors you have to consider when it comes to using pool liner products in your home. You have to ensure you use these products the right way to avoid any future costs associated with their use.
Thus, this guide has been about identifying issues surrounding pool liner lining up away from wall. You have to start by understanding the structure of modern pools, and to ensure you can get the best results.